Water Tank Insulation in Muruj Al Amir, Tabuk
Azl — delivered with a written warranty, to the Saudi Building Code
About Muruj Al Amir
Muruj Al Amir is a northwest Tabuk district enclosed by King Faisal Road to the north and King Khalid Road to the south, with Amr ibn Al As Street on the west and Al Wurud on the east. Furnished apartments and modern villas dominate, so roof insulation before finishing and checking plumbing in rented flats matter most to keep water from reaching lower units. District guide
Why Muruj Al Amir homes need water tank insulation
Villas and apartment buildings define Muruj Al Amir in Tabuk, beside King Khalid Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • King Khalid Road
- • King Faisal Road
- • Amr ibn Al As Street
- Nearby landmarks
- • Prince Fahd bin Sultan Park
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Muruj Al Amir
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Muruj Al Amir sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Muruj Al Amir residents
How much does tank insulation cost for a villa in Muruj Al Amir, Tabuk?
In Muruj Al Amir, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Muruj Al Amir?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Prince Fahd bin Sultan Park we also plan access and working hours.
How long does tank insulation take in Muruj Al Amir, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Tabuk is one of the cities we serve directly; the inspection in Muruj Al Amir is scheduled by team availability.
Book an inspection in Muruj Al Amir
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy