Water Tank Insulation in Al Wushaha, Taif
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Wushaha
Al Wushaha is one of Taif's older districts close to the city centre, bordered by Ash-Shuhada Al-Janubiyah to the north and An-Nuzhah to the west. It has an old section with narrow streets, a newer extension known as New Al Wushaha, and workshops on some edges. Older buildings often need renewed roof waterproofing and sealed cracks that let insects in, while newer ones need thermal insulation for Taif's cold winters. District guide
Why Al Wushaha homes need water tank insulation
Al Wushaha in Taif is home to apartment buildings, villas and shops and commercial buildings, connected by Al Baha Road. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Al Baha Road
- • Juz bin Muawiyah Street
- Common buildings
- • apartment buildings
- • villas
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Wushaha
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Wushaha sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Wushaha residents
How much does tank insulation cost for an apartment building in Al Wushaha, Taif?
In Al Wushaha, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Al Wushaha?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al Wushaha, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Taif is one of the cities we serve directly; the inspection in Al Wushaha is scheduled by team availability.
Book an inspection in Al Wushaha
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy