Water Tank Insulation in Al Iskan, Al Majmaah
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Iskan
Al Iskan lies north of King Abdullah district in eastern Al Majmaah on the site set aside for the Al Majmaah governorate housing project, with villas, floors and rest houses offered along internal streets. Its villas need roof waterproofing renewed as they age, thermal insulation added to annexes and upper floors, and periodic termite and insect checks of foundations and home gardens. District guide
Why Al Iskan homes need water tank insulation
Villas define Al Iskan in Al Majmaah, beside Al-Mughirah bin Al-Akhnas Street. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Al-Mughirah bin Al-Akhnas Street
- • Qais bin Abdullah Street
- Common buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Iskan
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Iskan sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Iskan residents
How much does tank insulation cost for a villa in Al Iskan, Al Majmaah?
In Al Iskan, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Al Iskan?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al Iskan, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Al Majmaah on request; once we receive your request from Al Iskan we coordinate a date by team availability and confirm it first.
Book an inspection in Al Iskan
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy