Water Tank Insulation in Al Muruj, Al Majmaah
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Muruj
Al Muruj is a residential district of Al Majmaah with plots in scheme 1460, offered on Uthman bin Affan Street and described as among the best locations to live; the district is still in its sale-and-build phase. Building in a new scheme is the chance to insulate exterior walls with insulated block or panels, waterproof roofs before tiling, and pre-treat the ground around footings against termites. District guide
Why Al Muruj homes need water tank insulation
Al Muruj lies in Al Majmaah along Uthman bin Affan Street, and is dominated by villas. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Uthman bin Affan Street
- Common buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Muruj
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Muruj sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Muruj residents
How much does tank insulation cost for a villa in Al Muruj, Al Majmaah?
In Al Muruj, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Muruj?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al Muruj, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Al Majmaah on request; once we receive your request from Al Muruj we coordinate a date by team availability and confirm it first.
Book an inspection in Al Muruj
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy