Water Tank Insulation in Al Buhayrah, Hail
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Buhayrah
Al Buhayrah is a south Hail district east of Al Matar, crossed by King Saud Road and Hatim Al Tai Street, with villas and flats beside shops, warehouses, showrooms and hotels. Warehouses and showrooms on the main roads need insulation of wide roofs and metal panels, while neighbouring villas need conventional roof insulation and periodic pest control. District guide
Why Al Buhayrah homes need water tank insulation
Al Buhayrah lies in Hail along King Saud Road and Hatim Al Tai Street, and is dominated by villas, apartment buildings, shops and commercial buildings and warehouses and workshops. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • King Saud Road
- • Hatim Al Tai Street
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
- • warehouses and workshops
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Buhayrah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Buhayrah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Buhayrah residents
How much does tank insulation cost for a villa in Al Buhayrah, Hail?
In Al Buhayrah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Buhayrah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al Buhayrah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Hail is one of the cities we serve directly; the inspection in Al Buhayrah is scheduled by team availability.
Book an inspection in Al Buhayrah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy