Water Tank Insulation in Ash Shifa, Hail
Azl — delivered with a written warranty, to the Saudi Building Code
About Ash Shifa
Ash Shifa in Hail lies between An Nuqrah and Ar Rasf with a modern plan, next to As Salam and Al Aziziyah; King Faisal Street is a main artery and it connects to King Abdulaziz Road. Villas, apartments and shops are all present, and its modern villas with exposed roofs benefit from layered thermal insulation plus a waterproof layer protecting the slab from winter rain. District guide
Why Ash Shifa homes need water tank insulation
Ash Shifa in Hail is home to villas, apartment buildings and shops and commercial buildings, connected by King Faisal Street. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • King Faisal Street
- • King Abdulaziz Road
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ash Shifa
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ash Shifa sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ash Shifa residents
How much does tank insulation cost for a villa in Ash Shifa, Hail?
In Ash Shifa, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Ash Shifa?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Ash Shifa, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Hail is one of the cities we serve directly; the inspection in Ash Shifa is scheduled by team availability.
Book an inspection in Ash Shifa
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy