Water Tank Insulation in Makkah, Jubail
Azl — delivered with a written warranty, to the Saudi Building Code
About Makkah
Makkah district in Jubail Industrial City is divided into Makkah North and Makkah South, crossed by Makkah Road, and dominated by rental villas of varying sizes with some flats. Because rental villas change families, it pays to inspect roof and bathroom waterproofing at each tenancy change and to carry out a full pest treatment before new occupants move in. District guide
Why Makkah homes need water tank insulation
Makkah in Jubail is home to villas and apartment buildings, connected by Makkah Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. High humidity affects bonding and curing, so application is scheduled in the least humid hours. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Makkah Road
- • Zamzam Street
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Makkah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Makkah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Makkah residents
How much does tank insulation cost for a villa in Makkah, Jubail?
In Makkah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Makkah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Makkah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Jubail on request; once we receive your request from Makkah we coordinate a date by team availability and confirm it first.
Book an inspection in Makkah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy