Water Tank Insulation in Atud, Khamis Mushait
Azl — delivered with a written warranty, to the Saudi Building Code
About Atud
Atud is a residential district in Khamis Mushait that includes a new housing plan; listings place it near the Khamis–Abha road, opposite the industrial area, with a park and walkway under construction. Residents mention relying on desalinated-water tankers in parts of it, so properly insulating ground and roof tanks matters, as do roof insulation for new villas and control of pests coming from nearby vacant land. District guide
Why Atud homes need water tank insulation
Atud in Khamis Mushait is home to villas and apartment buildings, connected by Atud Ash-Shamali Street. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Atud Ash-Shamali Street
- • Faris Al-Azdi Street
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Atud
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Atud sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Atud residents
How much does tank insulation cost for a villa in Atud, Khamis Mushait?
In Atud, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Atud?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Atud, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Khamis Mushait is one of the cities we serve directly; the inspection in Atud is scheduled by team availability.
Book an inspection in Atud
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy