Water Tank Insulation in At Taneem, Makkah
Azl — delivered with a written warranty, to the Saudi Building Code
About At Taneem
At Taneem covers about twenty-three square kilometres in north Makkah under Al Umrah municipality, roughly ten kilometres from the Grand Mosque near the Fourth Ring Road, with apartment buildings and villas housing about forty thousand people. Its size and varied building stock mean balanced demand between insulating new buildings and restoring roofs on older blocks. District guide
Why At Taneem homes need water tank insulation
Apartment buildings and villas define At Taneem in north Makkah, beside Fourth Ring Road. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • Fourth Ring Road
- Nearby landmarks
- • Aisha Mosque
- Common buildings
- • apartment buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in At Taneem
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical At Taneem sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from At Taneem residents
How much does tank insulation cost for an apartment building in At Taneem, Makkah?
In At Taneem, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in At Taneem?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Aisha Mosque we also plan access and working hours.
How long does tank insulation take in At Taneem, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Makkah is one of the cities we serve directly; the inspection in At Taneem is scheduled by team availability.
Book an inspection in At Taneem
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy