Water Tank Insulation in An Nawwariyah, Makkah
Azl — delivered with a written warranty, to the Saudi Building Code
About An Nawwariyah
An Nawwariyah is a suburb north of Makkah on Madinah Road outside the Haram boundary. Once watermelon farms and red-brick factories, it is now a modern district of villas and apartment blocks near a wadi where residents have asked for a flood-protection dam. That makes foundation and roof waterproofing and good rainwater drainage essential, alongside thermal insulation for new villas. District guide
Why An Nawwariyah homes need water tank insulation
An Nawwariyah in north Makkah is home to villas and apartment buildings, connected by Madinah Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. Sitting near a wadi means storm and rain water may collect in places, so falls and drainage are reviewed before insulating. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Madinah Road
- • Fourth Ring Road
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in An Nawwariyah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical An Nawwariyah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from An Nawwariyah residents
How much does tank insulation cost for a villa in An Nawwariyah, Makkah?
In An Nawwariyah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in An Nawwariyah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in An Nawwariyah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Makkah is one of the cities we serve directly; the inspection in An Nawwariyah is scheduled by team availability.
Book an inspection in An Nawwariyah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy