Water Tank Insulation in Al Amir Mishal, Najran
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Amir Mishal
Al Amir Mishal is an upscale residential district of Najran with a triangular layout framed by King Saud, King Abdulaziz and Al Jawafah roads, bordered to the north by the Ibn Jarallah plan. Villas with wide roofs dominate, so thermal insulation of roofs and walls is key to cutting cooling loads in Najran's hot summer, together with waterproofing for roofs and tanks. District guide
Why Al Amir Mishal homes need water tank insulation
Villas define Al Amir Mishal in south Najran, beside King Saud Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • King Saud Road
- • King Abdulaziz Road
- • Al Jawafah Road
- Common buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Amir Mishal
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Amir Mishal sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Amir Mishal residents
How much does tank insulation cost for a villa in Al Amir Mishal, Najran?
In Al Amir Mishal, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Amir Mishal?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al Amir Mishal, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Najran on request; once we receive your request from Al Amir Mishal we coordinate a date by team availability and confirm it first.
Book an inspection in Al Amir Mishal
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy