Water Tank Insulation in Al Khalidiyah, Najran
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Khalidiyah
Al Khalidiyah is a mid-city Najran district with varied services, adjoining Al Amir Mishal and crossed by King Abdullah bin Abdulaziz Road, with restaurants and shops scattered among homes. Food outlets next to housing call for regular cockroach and rat control programmes, while villas and apartment blocks need roof and bathroom waterproofing to limit leaks. District guide
Why Al Khalidiyah homes need water tank insulation
Al Khalidiyah in Najran is home to villas, apartment buildings and shops and commercial buildings, connected by King Abdullah bin Abdulaziz Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • King Abdullah bin Abdulaziz Road
- Common buildings
- • villas
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Khalidiyah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Khalidiyah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Khalidiyah residents
How much does tank insulation cost for a villa in Al Khalidiyah, Najran?
In Al Khalidiyah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Khalidiyah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al Khalidiyah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Najran on request; once we receive your request from Al Khalidiyah we coordinate a date by team availability and confirm it first.
Book an inspection in Al Khalidiyah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy