Water Tank Insulation in Al Janadriyah, Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Janadriyah
Al Janadriyah is on east Riyadh's outer edge, between Dammam Road and Khurais Road, next to Ar Rimal, An Nadwah, Al Muaizilah and Al Qadisiyah. Residential villas and plots awaiting construction prevail in a quiet setting. New villas on open ground face strong sun and dusty winds, so reflective thermal insulation and UV-resistant waterproofing pay off. District guide
Why Al Janadriyah homes need water tank insulation
Al Janadriyah in east Riyadh is home to villas, connected by Dammam Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Dammam Road
- • Khurais Road
- Common buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Janadriyah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Janadriyah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Janadriyah residents
How much does tank insulation cost for a villa in Al Janadriyah, Riyadh?
In Al Janadriyah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Janadriyah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al Janadriyah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in Al Janadriyah is scheduled by team availability.
Book an inspection in Al Janadriyah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy