Water Tank Insulation in An Nasim Al Gharbi (West Naseem), Riyadh
Azl — delivered with a written warranty, to the Saudi Building Code
About An Nasim Al Gharbi (West Naseem)
An Nasim Al Gharbi lies south of Khurais Road between Abdulrahman bin Awf Road to the west and Hassan bin Thabit Street to the east, under Al Naseem sub-municipality. Compact housing units rise above ground-floor shops. This mixed pattern calls for roof waterproofing plus insulation of the slabs between shops and flats to limit moisture and heat transfer. District guide
Why An Nasim Al Gharbi (West Naseem) homes need water tank insulation
An Nasim Al Gharbi (West Naseem) lies in east Riyadh along Khurais Road and Hassan bin Thabit Street, and is dominated by apartment buildings, villas and shops and commercial buildings. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • Khurais Road
- • Hassan bin Thabit Street
- • Abdulrahman bin Awf Road
- • Prince Saad bin Abdulrahman Al-Awwal Road
- Common buildings
- • apartment buildings
- • villas
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in An Nasim Al Gharbi (West Naseem)
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical An Nasim Al Gharbi (West Naseem) sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from An Nasim Al Gharbi (West Naseem) residents
How much does tank insulation cost for an apartment building in An Nasim Al Gharbi (West Naseem), Riyadh?
In An Nasim Al Gharbi (West Naseem), a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in An Nasim Al Gharbi (West Naseem)?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in An Nasim Al Gharbi (West Naseem), and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Riyadh is one of the cities we serve directly; the inspection in An Nasim Al Gharbi (West Naseem) is scheduled by team availability.
Book an inspection in An Nasim Al Gharbi (West Naseem)
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy