Water Tank Insulation in Al Qadisiyah, Tabuk
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Qadisiyah
Al Qadisiyah is an established Tabuk district seven to eight kilometres from the centre, between Ar Rawdah and Al Masif, reached via King Khalid Road and Umar ibn Al Khattab Street. It has old houses and narrow streets alongside villas and flats, and the older homes often need their roof waterproofing restored and cracks treated before the rainy months. District guide
Why Al Qadisiyah homes need water tank insulation
Villas, apartment buildings and older traditional houses define Al Qadisiyah in Tabuk, beside King Khalid Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • King Khalid Road
- • Umar ibn Al Khattab Street
- Common buildings
- • villas
- • apartment buildings
- • older traditional houses
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Qadisiyah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Qadisiyah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Qadisiyah residents
How much does tank insulation cost for a villa in Al Qadisiyah, Tabuk?
In Al Qadisiyah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Qadisiyah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al Qadisiyah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Tabuk is one of the cities we serve directly; the inspection in Al Qadisiyah is scheduled by team availability.
Book an inspection in Al Qadisiyah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy