Water Tank Insulation in Al-Hada, Taif
Azl — delivered with a written warranty, to the Saudi Building Code
About Al-Hada
Al-Hada is a resort suburb on the mountain heights toward Makkah, crossed by the famous Al-Hada Road linking Taif and Makkah, and dotted with resorts, rest houses and villas. Its high elevation brings colder weather, more rain and fog than central Taif, so buildings need strong thermal insulation and waterproofing against moisture and condensation. District guide
Why Al-Hada homes need water tank insulation
Al-Hada lies in west Taif along Al-Hada Road, and is dominated by villas and rest houses and farms. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • Al-Hada Road
- Common buildings
- • villas
- • rest houses and farms
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al-Hada
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al-Hada sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al-Hada residents
How much does tank insulation cost for a villa in Al-Hada, Taif?
In Al-Hada, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al-Hada?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Al-Hada, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. Taif is one of the cities we serve directly; the inspection in Al-Hada is scheduled by team availability.
Book an inspection in Al-Hada
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy