Epoxy Flooring & Coatings in Al-Hada, Taif
Azl — delivered with a written warranty, to the Saudi Building Code
About Al-Hada
Al-Hada is a resort suburb on the mountain heights toward Makkah, crossed by the famous Al-Hada Road linking Taif and Makkah, and dotted with resorts, rest houses and villas. Its high elevation brings colder weather, more rain and fog than central Taif, so buildings need strong thermal insulation and waterproofing against moisture and condensation. District guide
Why Al-Hada homes need epoxy flooring & coatings
Villas and rest houses and farms define Al-Hada in west Taif, beside Al-Hada Road. In villas epoxy is usually requested for the garage, store and laundry, sometimes for annexes and majlis rooms in glossy easy-clean systems. The altitude brings heavier rain and day–night temperature swings, so flexible materials and careful expansion joints are preferred. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The fix: an epoxy system per traffic type: coating for stores, self-levelling for shops, screed for parking.
- Main roads
- • Al-Hada Road
- Common buildings
- • villas
- • rest houses and farms
Materials and specifications
- Epoxy primer: Seals the concrete pores and bonds the system; its type depends on slab moisture and porosity.
- Roller-applied epoxy coating: Two thin coats for majlis rooms, diwaniyas, offices and light-traffic storage.
- Self-levelling epoxy: A smooth seamless surface a few millimetres thick for showrooms, corridors, hospitals and kitchens.
- Epoxy mortar with quartz sand: For heavy loads, forklifts and car parks; can be textured for slip resistance.
- Aliphatic polyurethane topcoat: Improves scratch resistance and colour stability where light exposure is high, depending on the system.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al-Hada
- Assess the floor: concrete age, surface strength and moisture using the tests set in the system's data sheet
- Prepare the surface mechanically by grinding or shot-blasting, then vacuum all dust
- Repair cracks, holes and construction joints with epoxy filler or mortar
- Apply the primer, respecting surface temperature and dew-point margin
- Apply the system coats at the specified consumption and thickness, broadcasting sand for slip-resistant finishes
- Apply the topcoat and close the area until full cure before traffic and loads
Indicative prices for typical Al-Hada sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 50 m² | 2,000 – 6,000 | Written, by work type |
| Typical | 125 m² | 4,400 – 15,000 | Written, by work type |
| Larger | 200 m² | 7,000 – 24,000 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from Al-Hada residents
How much does epoxy flooring cost for a villa in Al-Hada, Taif?
In Al-Hada, for about 150 m² the indicative cost is SAR 5,250–18,000 before VAT (SAR 35–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits epoxy flooring in Al-Hada?
Two-coat epoxy for light use, self-levelling for clean areas, and quartz screed for heavy loads and traffic.
How long does epoxy flooring take in Al-Hada, and do you serve it?
The work takes typically two to five days including preparation, coats and curing before use. Taif is one of the cities we serve directly; the inspection in Al-Hada is scheduled by team availability.
Book an inspection in Al-Hada
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy