Water Tank Insulation in Al-Ta'akhi, Yanbu
Azl — delivered with a written warranty, to the Saudi Building Code
About Al-Ta'akhi
Al-Ta'akhi sits near Yanbu Commercial Port with direct beach access via Prince Muqrin bin Abdulaziz Road, keeping a quiet character despite the port, with hotels, leisure venues and basic services. Exposure to salty sea air makes roof waterproofing and protective façade coatings a priority to limit corrosion and plaster spalling. District guide
Why Al-Ta'akhi homes need water tank insulation
Al-Ta'akhi in west Yanbu is home to apartment buildings and shops and commercial buildings, connected by Prince Muqrin bin Abdulaziz Road. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. Being near the sea means humidity and salt that speed rebar corrosion and affect curing, so surface moisture and dew point are checked before any application. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • Prince Muqrin bin Abdulaziz Road
- Nearby landmarks
- • Yanbu Commercial Port
- Common buildings
- • apartment buildings
- • shops and commercial buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al-Ta'akhi
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al-Ta'akhi sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al-Ta'akhi residents
How much does tank insulation cost for an apartment building in Al-Ta'akhi, Yanbu?
In Al-Ta'akhi, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Al-Ta'akhi?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Yanbu Commercial Port we also plan access and working hours.
How long does tank insulation take in Al-Ta'akhi, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Yanbu on request; once we receive your request from Al-Ta'akhi we coordinate a date by team availability and confirm it first.
Book an inspection in Al-Ta'akhi
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy