Epoxy Flooring & Coatings in At Tilal, Hafr Al-Batin
Azl — delivered with a written warranty, to the Saudi Building Code
About At Tilal
At Tilal is one of Hafr Al-Batin's largest districts at about 609 hectares, crossed by Harun Al Rashid and Umar ibn Al Khattab roads and streets such as Khalid bin Abdulaziz. Its wide extent and predominance of villas make roof thermal insulation a key need in Hafr Al-Batin's hot summers, along with periodic pest checks around gardens and outbuildings. District guide
Why At Tilal homes need epoxy flooring & coatings
At Tilal in Hafr Al-Batin is home to villas, connected by Harun Al Rashid Road. In villas epoxy is usually requested for the garage, store and laundry, sometimes for annexes and majlis rooms in glossy easy-clean systems. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. The city's heat speeds epoxy cure and shortens working time, so it is laid in cooler hours. The fix: mechanical preparation and moisture testing, then an epoxy system matched to the use.
- Main roads
- • Harun Al Rashid Road
- • Umar ibn Al Khattab Road
- • Khalid bin Abdulaziz Street
- Common buildings
- • villas
Materials and specifications
- Epoxy primer: Seals the concrete pores and bonds the system; its type depends on slab moisture and porosity.
- Roller-applied epoxy coating: Two thin coats for majlis rooms, diwaniyas, offices and light-traffic storage.
- Self-levelling epoxy: A smooth seamless surface a few millimetres thick for showrooms, corridors, hospitals and kitchens.
- Epoxy mortar with quartz sand: For heavy loads, forklifts and car parks; can be textured for slip resistance.
- Aliphatic polyurethane topcoat: Improves scratch resistance and colour stability where light exposure is high, depending on the system.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in At Tilal
- Assess the floor: concrete age, surface strength and moisture using the tests set in the system's data sheet
- Prepare the surface mechanically by grinding or shot-blasting, then vacuum all dust
- Repair cracks, holes and construction joints with epoxy filler or mortar
- Apply the primer, respecting surface temperature and dew-point margin
- Apply the system coats at the specified consumption and thickness, broadcasting sand for slip-resistant finishes
- Apply the topcoat and close the area until full cure before traffic and loads
Indicative prices for typical At Tilal sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 50 m² | 2,000 – 6,000 | Written, by work type |
| Typical | 125 m² | 4,400 – 15,000 | Written, by work type |
| Larger | 200 m² | 7,000 – 24,000 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from At Tilal residents
How much does epoxy flooring cost for a villa in At Tilal, Hafr Al-Batin?
In At Tilal, for about 150 m² the indicative cost is SAR 5,250–18,000 before VAT (SAR 35–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits epoxy flooring in At Tilal?
Two-coat epoxy for light use, self-levelling for clean areas, and quartz screed for heavy loads and traffic.
How long does epoxy flooring take in At Tilal, and do you serve it?
The work takes typically two to five days including preparation, coats and curing before use. We serve Hafr Al-Batin on request; once we receive your request from At Tilal we coordinate a date by team availability and confirm it first.
Book an inspection in At Tilal
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy