Water Tank Insulation in At Tilal, Hafr Al-Batin
Azl — delivered with a written warranty, to the Saudi Building Code
About At Tilal
At Tilal is one of Hafr Al-Batin's largest districts at about 609 hectares, crossed by Harun Al Rashid and Umar ibn Al Khattab roads and streets such as Khalid bin Abdulaziz. Its wide extent and predominance of villas make roof thermal insulation a key need in Hafr Al-Batin's hot summers, along with periodic pest checks around gardens and outbuildings. District guide
Why At Tilal homes need water tank insulation
At Tilal in Hafr Al-Batin is home to villas, connected by Harun Al Rashid Road. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Harun Al Rashid Road
- • Umar ibn Al Khattab Road
- • Khalid bin Abdulaziz Street
- Common buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in At Tilal
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical At Tilal sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from At Tilal residents
How much does tank insulation cost for a villa in At Tilal, Hafr Al-Batin?
In At Tilal, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in At Tilal?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in At Tilal, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Hafr Al-Batin on request; once we receive your request from At Tilal we coordinate a date by team availability and confirm it first.
Book an inspection in At Tilal
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy