Spray Foam Insulation (Polyurethane) in At Tilal, Hafr Al-Batin
Azl — delivered with a written warranty, to the Saudi Building Code
About At Tilal
At Tilal is one of Hafr Al-Batin's largest districts at about 609 hectares, crossed by Harun Al Rashid and Umar ibn Al Khattab roads and streets such as Khalid bin Abdulaziz. Its wide extent and predominance of villas make roof thermal insulation a key need in Hafr Al-Batin's hot summers, along with periodic pest checks around gardens and outbuildings. District guide
Why At Tilal homes need spray foam insulation (polyurethane)
At Tilal lies in Hafr Al-Batin along Harun Al Rashid Road and Umar ibn Al Khattab Road, and is dominated by villas. Spray foam suits detail-heavy villa roofs because it covers them in one seamless layer insulating against both heat and water. The city's cold winters and hot summers cause repeated expansion and contraction, so a flexible system is preferred. In the city's intense heat spraying is scheduled in cooler hours to keep the substrate within the manufacturer's limits. The fix: closed-cell foam at the thickness set by the thermal calculation, then a UV-protective topcoat.
- Main roads
- • Harun Al Rashid Road
- • Umar ibn Al Khattab Road
- • Khalid bin Abdulaziz Street
- Common buildings
- • villas
Materials and specifications
- High-density polyurethane foam: Density suited to trafficable roofs and compression.
- Acrylic or polyurea protective coat: Protects the foam from UV and reflects heat.
- Primer for metal or concrete: Improves adhesion depending on the substrate.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in At Tilal
- Clean and fully dry the surface
- Mask walls and windows from overspray
- Spray the foam in passes to the required thickness
- Check thickness and evenness
- Apply the UV protective coat
- Final inspection and handover
Indicative prices for typical At Tilal sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Smaller | 250 m² | 7,500 – 13,750 | Written, by work type |
| Typical | 375 m² | 11,250 – 20,650 | Written, by work type |
| Larger | 500 m² | 15,000 – 27,500 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Questions from At Tilal residents
How much does spray foam insulation cost for a villa in At Tilal, Hafr Al-Batin?
In At Tilal, for about 400 m² the indicative cost is SAR 12,000–22,000 before VAT (SAR 30–55 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits spray foam insulation in At Tilal?
Closed-cell roofing-grade PU foam at a thickness set by the thermal calculation, with an acrylic or polyurea protective coat.
How long does spray foam insulation take in At Tilal, and do you serve it?
The work takes often one to three days for medium roofs including the topcoat. We serve Hafr Al-Batin on request; once we receive your request from At Tilal we coordinate a date by team availability and confirm it first.
Book an inspection in At Tilal
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy