Water Tank Insulation in Ad Dubbat, Najran
Azl — delivered with a written warranty, to the Saudi Building Code
About Ad Dubbat
Ad Dubbat is a Najran district listed with North Ad Dubbat among the city's districts, with plots offered for rent on King Faisal bin Abdulaziz Street. An established district of family homes needs, as the years pass, renewed waterproofing layers on roofs and around water tanks and thermal insulation to ease the summer heat, with gardens and yards checked to limit ant and crawling-insect nests. District guide
Why Ad Dubbat homes need water tank insulation
Ad Dubbat lies in Najran along King Faisal bin Abdulaziz Street, and is dominated by villas and apartment buildings. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: check the concrete first, repair honeycombing and cracks, then line the tank with a system suited to its age and condition.
- Main roads
- • King Faisal bin Abdulaziz Street
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ad Dubbat
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ad Dubbat sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ad Dubbat residents
How much does tank insulation cost for a villa in Ad Dubbat, Najran?
In Ad Dubbat, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Ad Dubbat?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Ad Dubbat, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Najran on request; once we receive your request from Ad Dubbat we coordinate a date by team availability and confirm it first.
Book an inspection in Ad Dubbat
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy