Water Tank Insulation in Al Jamiah, Najran
Azl — delivered with a written warranty, to the Saudi Building Code
About Al Jamiah
Al Jamiah is a Najran district named after Najran University, with buildings for rent on Ibn Yusuf Al Kindari and Omar Al Mayanishi streets and plots on Talhah ibn Khuwaylid Street. Demand for rented flats near the university means densely occupied blocks where bathroom leaks between floors recur and kitchens are busy, so they need roof and bathroom waterproofing and a fixed cockroach and insect control programme. District guide
Why Al Jamiah homes need water tank insulation
Al Jamiah in Najran is home to apartment buildings and villas, connected by Ibn Yusuf Al Kindari Street. In apartment buildings one shared ground tank serves several flats, so a leak multiplies consumption and dampness in the adjacent basement and parking. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: define the use (residential or commercial) and choose a lining suited to operating hours, with a fill test before re-commissioning.
- Main roads
- • Ibn Yusuf Al Kindari Street
- • Omar Al Mayanishi Street
- • Talhah ibn Khuwaylid Street
- Nearby landmarks
- • Najran University
- Common buildings
- • apartment buildings
- • villas
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Al Jamiah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Al Jamiah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 15 m³ (≈ 29 m² internal) | 1,750 – 3,550 | Written, by work type |
| Medium tank | 28 m³ (≈ 44 m² internal) | 2,650 – 5,250 | Written, by work type |
| Large tank | 40 m³ (≈ 56 m² internal) | 3,350 – 6,700 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Al Jamiah residents
How much does tank insulation cost for an apartment building in Al Jamiah, Najran?
In Al Jamiah, a tank of about 28 m³ has roughly 44 m² of internal surface, giving an indicative SAR 2,650–5,250 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which material is used for tank insulation in Al Jamiah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue. Near Najran University we also plan access and working hours.
How long does tank insulation take in Al Jamiah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Najran on request; once we receive your request from Al Jamiah we coordinate a date by team availability and confirm it first.
Book an inspection in Al Jamiah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy