Water Tank Insulation in Ar Rawdah, Najran
Azl — delivered with a written warranty, to the Saudi Building Code
About Ar Rawdah
Ar Rawdah is among the Najran districts with the most plots and new villas on offer, on Talal bin Abdulaziz, Talib Al Azdi, Muhammad Al Khazraji and Ash Shura streets, plus flats and warehouses for rent. The volume of plots shows a district being built now, the best time to build foundation and roof insulation into construction and to protect new villas against termites and insects from adjoining vacant land. District guide
Why Ar Rawdah homes need water tank insulation
Ar Rawdah in Najran is home to villas and apartment buildings, connected by Talal bin Abdulaziz Street. Villas usually rely on a concrete ground tank feeding a roof tank, and any crack in its wall wastes water into the soil unnoticed until the bill rises. Many buildings in the district are under construction, and the best time to insulate is before tiling and backfill, with a flood test before covering. Summer heat warms exposed roof tanks and speeds coating breakdown, so reflective external insulation helps. The fix: clean the tank, repair cracks, line it with a potable-water rated coating and fill-test it before use.
- Main roads
- • Talal bin Abdulaziz Street
- • Talib Al Azdi Street
- • Muhammad Al Khazraji Street
- • Ash Shura Street
- Common buildings
- • villas
- • apartment buildings
Materials and specifications
- Potable-water-approved epoxy: Hard, smooth, easy-to-clean lining; must be certified for drinking water.
- Tank-grade polyurethane: Highly flexible, tolerates slight movement in the concrete.
- Crystalline cementitious materials: Penetrate and seal concrete pores; often used as a first treatment.
We select products conforming to the relevant Saudi standards and apply them per the manufacturer's datasheet.
Execution plan in Ar Rawdah
- Empty, clean and disinfect the tank
- Inspect walls and floor and mark cracks and weak points
- Treat cracks, joints and corners
- Apply primer then insulation coats to the required thickness
- Allow full curing per the manufacturer
- Final wash and fill test before use
Indicative prices for typical Ar Rawdah sizes
| Case | Size | Estimated cost (SAR) | Warranty |
|---|---|---|---|
| Small tank | 8 m³ (≈ 20 m² internal) | 1,200 – 2,400 | Written, by work type |
| Medium tank | 17 m³ (≈ 32 m² internal) | 1,900 – 3,800 | Written, by work type |
| Large tank | 25 m³ (≈ 41 m² internal) | 2,450 – 4,900 | Written, by work type |
Indicative ranges excluding VAT, based on sizes common in the district; not a quote. Final price after inspection.
Calculated internal area: 59 m² · Approx. capacity: 30 m³
Questions from Ar Rawdah residents
How much does tank insulation cost for a villa in Ar Rawdah, Najran?
In Ar Rawdah, a tank of about 17 m³ has roughly 32 m² of internal surface, giving an indicative SAR 1,900–3,800 before VAT (SAR 60–120 per m²). Prices are indicative and confirmed after inspection according to condition, material and access.
Which system suits tank insulation in Ar Rawdah?
Usually a potable-water certified epoxy lining over sound concrete, or a crystalline system when pressure from outside is the issue.
How long does tank insulation take in Ar Rawdah, and do you serve it?
The work takes typically two to several days including draining, preparation, coats and curing before refilling. We serve Najran on request; once we receive your request from Ar Rawdah we coordinate a date by team availability and confirm it first.
Book an inspection in Ar Rawdah
Details are pre-filled from this page; add only what's specific to you, and your message reaches us neatly on WhatsApp.
Nothing is stored on this website; your message opens in WhatsApp for you to send to 0544027180. Privacy policy